{"id":3658,"date":"2026-08-27T06:12:28","date_gmt":"2026-08-27T06:12:28","guid":{"rendered":"https:\/\/firstfibertech.com\/?p=3658"},"modified":"2026-08-28T11:36:49","modified_gmt":"2026-08-28T11:36:49","slug":"manual-do-utilizador-do-otdr-da-serie-8000max","status":"publish","type":"post","link":"https:\/\/firstfibertech.com\/pt\/blog\/8000max-series-otdr-user-guide\/","title":{"rendered":"Guia do Utilizador do OTDR da S\u00e9rie 8000MAX"},"content":{"rendered":"\n

Safety Warning
Power Adaptor
Input: \u00a0
Output: \u00a0
AC 100V ~ 240V, 50\/60Hz; @1.6A\u00a0
DC 12V, 3A ~ 4A\u00a0
Use the power adaptor in strict accordance with the specifications, or it may cause damage to the device
Battery
Inside the unit is a dedicated lithium battery. For optimal battery performance, first use should be powered by the\u00a0
internal battery. This will be exhausted, therefore, please ensure the first battery charge is no less than 4 hours. The\u00a0
charging temperature range of the battery in the machine is -10oC ~ 50oC. When the ambient temperature is too high,\u00a0
please terminate the charging for your safety. When the unit is idle for more than 2 months, it should be charged in\u00a0
time to maintain the battery power. Do not take out the battery without permission; Please do not leave the battery\u00a0
near a fire source or strong heat; Do not open or damage the battery; The temperature range of battery for long-term\u00a0
storage is -20oC ~ 45oC.\u00a0<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

Laser Safety Instructions
The laser safety level of this unit is: CLASS III B, being potentially harmful to the human body, when in use, please pay\u00a0
attention to safety. When the visible red light function of the unit is on, please do not look directly at the output port\u00a0
of the red light source or at the end of the optical fibre connected to the red light output end, so as to avoid damage\u00a0
to the eyes. When the unit is no longer in use, please cover the light outlet with a dust cap.<\/p>\n\n\n\n

Product Features
1. Wavelength
Single mode: \u00a01310\/1550\/1490\/1625\/1650 \u00a0
Multi mode: \u00a0
850\/1300 \u00a0\u00a0
2. Measuring range: \u00a0120km~240km
3. Touch screen
Note: Different models with\u00a0
different configuration
4. Data format: Sor format
5. Integration capabilities: Power meter, Light source, VFL, Insertion loss tester, OTDR, Event map, FDO\u00a0
6. Keyboard input, edit save file name and line number
7. Supports user upgrade
8. The 5.6-inch TFT screen, 640*480 pixels, is visible in the outdoor sunlight
9. Two 7.4v \/2500mAh x2 lithium batteries are used, which can be fully charged for more than 8 hours
10. Unit offers convenient screenshot interface function<\/p>\n\n\n\n

\"FirstFiber<\/figure>\n\n\n\n

User Guide<\/p>\n\n\n\n

\"FirstFiber<\/figure>\n\n\n\n
\"8000MAX<\/figure>\n\n\n\n

The 8000MAX series of the OTDR fibre optical testers offer \u00a0multifunctional optical measurements, which integrates\u00a0
OTDR, visual fault locator, optical power meter, light source, insertion loss tester and event map.<\/p>\n\n\n\n

1.0 System Setting<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

Press [F3] in the interface of main menu to enter the system setting interface, and the following settings can be
performed:
Language selection
Backlight adjustment
Automatic shutdown
Date Settings
Time Setting
Touch screen calibrate
Upgrades
System information (Series no, Unit model, Hardware and software version number)
2.0 OTDR Function Module
2.1 Setting
Under the main interface of the metre, press [SETUP] button to quickly enter the setting interface or press [F1] to enter
parameter setting on the main interface of OTDR.<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

2.1.1 Test Parameter
Wavelength: 1310nm, 1550nm (Optional: 1625nm, 1650nm online test and 850nm\/1300nm multimode)\u00a0
Measuring range:
AUTO mode: The device will automatically set the most appropriate parameters for the current measurement, and the\u00a0
measurement range and pulse width selected values cannot be modified at this time.\u00a0
Manual mode: The range and pulse width can be set manually.\u00a0
Pulse Width: Pulse width refers to the time width of emitting optical pulse signal during measurement. The wider\u00a0
the pulse width is, the stronger the optical power injected into the fibre, the stronger the backscattering signal of the\u00a0
f
ibre, the further the OTDR can effectively detect. The wide pulse width will cause saturation of the\u00a0
initial reflection signal and could result in large blind areas. Please note, the selection of pulse width is related to the\u00a0
measurement of fibre. The longer the length is, the wider the pulse width. It can only be modified in the automatic\u00a0
measurement mode, which defaults to \u2018automatic configuration\u2019
Measuring time: In the mean measurement mode, the longer the detection time is, the better the signal-to-noise\u00a0
ratio, the more accurate the test results are. The user should select the detection time, which is proportional to the\u00a0
dynamic measurement. \u00a0\u00a0
Resolution: High resolution will have more sampling points and higher accuracy, but it will also increase the amount of\u00a0
data collected.\u00a0
Refractive index: Is the essential characteristics of optical fibre, which will differ between fibre optic manufacturers.\u00a0
The refractive index is the key parameter to calculate the distance, which can not be arbitrarily set.
Unit: km\/feet\/miles\u00a0
OTDR will automatically select the most appropriate reference pulse width when manual measurement range is set in\u00a0
automatic mode.\u00a0
The range and pulse width can be adjusted manually in manual mode. The following list is for reference only:<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

2.1.2 OTDR Parameter Setting
Various event measurement thresholds, including attenuation, reflection, slope, optical fibre end refractive index and\u00a0
scattering coefficient settings.\u00a0
The refractive index is selected by the user, and changing the refractive index setting will change the ranging result.\u00a0
The refractive index is provided by the fibre optic cable or fibre optic manufacturer. Users are advised to calibrate the\u00a0
group refractive index with a known length of fibre and record it.\u00a0
The scattering coefficient is usually obtained from the fibre optic cable manufacturer
2.1.3 Restore to Default
Restore to factory default Settings.
2.2 Test
Optical Time Domain Reflectometer \u00a0 \u00a0
Press [F1] key on the control panel to enter the measurement interface.\u00a0
Following is the meaning of each label in the measurement interface:
Main menu \u00a0
General section operation function menu\u00a0
Parameter Settings\u00a0
Measurement parameter Settings submenu\u00a0
Curve operation\u00a0
Curve manipulation sub-menu, including: cursor, zoom and curve translation\u00a0
File operations \u00a0 \u00a0
File operation submenu, including: open file, save file, multi trace operation and save file Settings.\u00a0
Event analysis\u00a0
Curve analysis sub-menu, including: cursor, curve zoom, event list view, add and delete events\u00a0
More (multi-trace operation and event analysis function description)-\u00a0
Add event: The event list is added accordingly- – – –\u00a0
Delete events: The event list will delete the event accordingly
Clear choice: When multi-trace line loads, clear the selected curve and event list
Remove other: When multi-trace lines are loaded, clear the list of curves and events other than the selected \u00a0
curve
Clear all: Clear all measurement curves and event lists in the current measurement interface
REAL TIME MODE:\u00a0
Parameter settings->Test time->Average mode; press [REAL\/AVG] key enter the real-time measurement mode. The\u00a0
current circuit is measured in real time, and the measurement parameters cannot be modified in the measurement\u00a0
mode. If the parameters need to be modified, the test needs to be stopped first. Event analysis will not be conducted\u00a0
during the real-time test, and event analysis will only be conducted after the test is stopped<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

AVERAGE MODE\u00a0
Real time mode
Parameter settings\/Test time\/XX seconds; Press [REAL\/AVG] key enter the real-time measurement mode. The curve\u00a0
consisting of the average values measured over a period of time can be displayed. The length of time can be edited\u00a0
in the \u2018measurement time\u2019 option in [SETUP].\u00a0<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

When the measurement is finished, the measurement result will be automatically saved.\u00a0
Under no circumstances shall the optical interface and the end of the tail fibre connected to the optical interface be\u00a0
directed to the eye of the operator or other person. Otherwise, the vision of the operator may be damaged, or even\u00a0
blind<\/p>\n\n\n\n

2.3 File Storage
Press [FILE] to view and edit stored files<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

The menu provides a complete file storage, call out function. The results of each measurement are automatically\u00a0
saved to internal storage (configurable) and marked with time, date, serial number and other information for easy\u00a0
reference. Users can name, number, comment on each measurement curve, and generate complete reports.\u00a0
2.4 Computer Software
If the user needs to carry out multi-curve comparison or other further analysis functions or remote operation, the\u00a0
measurement data stored in the device after measurement can also be printed by software.
3.0 Other Functional Modules
3.1 VFL Module<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

VFL module has two emission modes:\u00a0
CW MODE: In this mode a continuous stream of visible light is emitted.\u00a0
2Hz MODE: In this mode, visible light flashes at a frequency of 2Hz.\u00a0
Press [Shutdown], [MENU] or [ESC] to turn off the VFL
VFL Module
When using the VFL module, do not aim the emitter at the eyes, otherwise it may cause irreversible damage to the\u00a0
eyes.
3.2 OPM
Unit: dB, dBm, uW or mW\u00a0<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

START\/STOP\u00a0
Turn on and off power metre function\u00a0
Wavelength switching:\u00a0
Press the \u201cwavelength switch\u201d TAB to switch the current wavelength\u00a0
Set as the reference value:\u00a0
Press the \u201cREF\u201d TAB to set the current value to the power metre reference\u00a0
Clear zero:
Press the \u2018Zero\u2019 TAB to restore the reference value set\u00a0
Frequency: The power metre has a frequency identification function and can identify 270Hz\/1kHz\/2kHz.c
3.3 Light Source
The light source module and OTDR use the same optical port. OTDR has several wavelengths (except for\u00a0
multi-mode), and the light source has several wavelengths.<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

Start\/Shutdown
Open and shutdown the light source module
WL Switch
Press\u201cWL Switch\u201dto change wavelength
Frequency switching
Press the \u201cfrequency switch\u201d TAB to switch the output frequency of the laser: CW\/270Hz\/1kHz\/2kHz
Description of function and index of light source:
1.The output power of the laser: -5dBm\u00b12dB
2.Function on stable time rate: 3minutes
3.Short time stability: 0.05dB
4.Long time stability: 0.5dB
3.4 Loss Test Modules (Optional)
When the metre is installed with both the stable light source module and the power metre module, the loss test
module will be automatically activated.<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

Start\/stop: Turn on and off the loss test module\u00a0
WL Switch: Press the \u2018WL Switch\u2019 TAB to switch the current wavelength\u00a0
REF: Set the reference value.\u00a0
Zero: Restore the set reference value
4.0 Software Upgrade
Firmware updates are made by plugging a USB drive into the USB port (the upgrade software must be in the root\u00a0
directory).\u00a0
Steps: \u00a0
1. Place the software upgrade package in the root directory of your USB flash drive.\u00a0
2. Turn on the unit and insert the U disk into the USB port of the unit.
3. The main interface–>System Settings–>Software upgrade
4. After entering the upgrade interface, the upgrade will be completed automatically
Note: during the upgrade, please do not cut off the power or unplug the USB drive. These illegal operations may\u00a0
cause system software damage and the metre cannot start normally. Once this happens, you must contact the\u00a0
manufacturer or the authorized after-sales service point of the manufacturer for system repair.\u00a0<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

5.0 Instrument Maintenance and Trouble Shooting
5.1 Cleaning of connectors\u00a0
The optical output interface of this series of fibre optic tester is a universal, replaceable interface. In case the tester\u00a0
fails to test the normal curve, or the test result is not accurate, consider cleaning the connector first.\u00a0
When cleaning, be sure to do it when the OTDR function and visual red light fault location function are turned off.\u00a0
Unscrew the output port and wipe the end face with a special clean paper towel or cotton swab moistened with\u00a0
alcohol. At the same time, please cover the dust cap after the use of the unit, and keep it clean.\u00a0
5.2 Instrument screen cleaning\u00a0
The display of this series of fibre optic comprehensive tester is a 5.6-inch TFT color LCD with touch screen. Do not\u00a0
click the LCD screen with sharp objects when using, otherwise the LCD screen may be damaged: when cleaning, wipe\u00a0
the LCD screen with soft paper. Do not use organic solvent to wipe the LCD screen, otherwise it may cause damage to\u00a0
the LCD screen.\u00a0
5.3 Calibration\u00a0
It is recommended to calibrate the fibre optic tester every two years. For specific calibration, please contact the unit\u00a0
supplier
6.0 Common Faults and Treatment Methods<\/p>\n\n\n\n

\"8000MAX<\/figure>\n\n\n\n

Note: The above description is for reference only. Please refer to the new instructions for detailed usage.\u00a0
During the use of the unit, if there is any question, please contact with the unit supplier.
In the use of the unit, without permission, users are strictly prohibited to dismantle the machine,\u00a0
otherwise will lose the warranty qualification.<\/p>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

Aviso de seguran\u00e7a: Adaptador de alimenta\u00e7\u00e3o Entrada: Sa\u00edda: CA 100 V ~ 240 V, 50\/60 Hz; @1,6 A CC 12 V, 3 A ~ 4 A Utilize o adaptador de alimenta\u00e7\u00e3o em estrita conformidade com as especifica\u00e7\u00f5es, caso contr\u00e1rio poder\u00e1 causar danos ao dispositivo. Bateria: No interior da unidade encontra-se uma bateria de l\u00edtio dedicada. Para um desempenho ideal da bateria, a primeira utiliza\u00e7\u00e3o deve ser feita com a bateria interna. Esta ir\u00e1 esgotar-se, pelo que\u2026 Ler mais<\/a><\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[90],"tags":[],"class_list":["post-3658","post","type-post","status-publish","format-standard","hentry","category-otdr-8000max"],"_links":{"self":[{"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/posts\/3658","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/comments?post=3658"}],"version-history":[{"count":2,"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/posts\/3658\/revisions"}],"predecessor-version":[{"id":3866,"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/posts\/3658\/revisions\/3866"}],"wp:attachment":[{"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/media?parent=3658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/categories?post=3658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/firstfibertech.com\/pt\/wp-json\/wp\/v2\/tags?post=3658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}