Descripción
L925B Fiber Optical Mechanical Splicer can easily connect 250μm and 900μm diameter fiber. It is suitable for indoor cable connection. No need any adhesive and curing process.
– Fiber axial solid fit, reducing the performance degradation caused by the loss of matching fluid;
– Intermittent fit connection technology to ensure signal transmission;
– Bare fiber, tight-clad can be both used in the connector;
– Can be long-term used outside without loss value increased;
– High rate of success for installation and easy installation, the average connecting time is 150 seconds;
– It is applicable for optical fiber splicing and restoration for damaged lines.
Applicable for | φ 0.25 mm& φ 0.90 mmFiber |
Optical fiber diameter | 125μ m ( 652 & 657 ) |
Tight buffer diameter | 250μ m |
Fiber mode | Single & multimode |
Operation time | About 60s(No fiber cut) |
Average Insert loss | ≤ 0.25dB(1310nm & 1550nm) |
Return loss | ≤ -45dB |
Fastening strength of naked fiber | > 5 N |
Fastening strength of naked fiber holder | > 10 N |
Using temperature | -40~+75°C |
Storage temperature | -40~+80°C |