Description
ELC920H-APC LC/APC Fast Connector for 3.0mm 2.0mm and 0.9mm Indoor Cable Fiber Optic Field Assembly Connector
Features
– Fiber embedded, polishing in factory;
– Matching gel inside;
– Applicable for different situation;
– Meet various assembly operating habits；
– Screw type,total length:53.3mm, including soft tail
– Applied to Ø2.0 and Ø3.0 indoor cable, 0.9 invisible cable;
– The diameter of fiber coating:900 μm;
– Tensile strength:≥50N/2min
Item | Parameter |
Cable Scope | 3.0 mm & 2.0 mm & 0.9mm Cable |
Fiber Diameter | 125μm ( 652 & 657 ) |
Coating Diameter | 900μm |
Mode | SM |
Operation Time | about 1min (exclude fiber presetting) |
Insertion Loss | ≤ 0.3 dB(1310nm & 1550nm), Max ≤ 0.5 dB |
Return Loss | ≥55dB for APC |
Success Rate | >98% |
Reusable Times | ≥5 times |
Tighten Strength of Bare Fiber | >3N |
Tensile Strength | >50N/2min |
Temperature | -40~+85℃ |
On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
Mechanical Durability(500 times) | IL ≤ 0.3dB |
Drop Test(4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
FAQ
Q1: What cable sizes are supported by the ELC920H-UPC fast connector?
A: This connector is compatible with 3.0mm, 2.0mm indoor cables, and 0.9mm invisible/indoor cables.
Q2: What are the optical performance specifications (Insertion Loss & Return Loss)?
A: It features a typical insertion loss of ≤ 0.3dB (max ≤ 0.5dB) at 1310nm/1550nm and a return loss of ≥ 50dB for UPC polish.
Q3: How fast is field assembly, and can the connector be reused?
A: Field installation takes about 1 minute (excluding fiber presetting) with a success rate over 98%. It can be reused at least 5 times.
Q4: What key design features does the ELC920H-UPC connector offer?
A: It includes pre-embedded factory-polished single-mode fiber (G.652 & G.657), internal index-matching gel, a screw-type structure, and a total length of 53.3mm including the soft tail.
