Descrição
The fibers, 250μm, are positioned in aloose tube made of a high modulusplastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) is located in the centerof core as a non-metallic strength member.The tubes (and fillers) are strandedaround the strength member into acompact and circular core. An aluminumPolyethylene Laminate (APL) is appliedaround the cable core. Then the cablecore is covered with a thin polyethylene(PE) inner sheath, which is filled withjelly to protect it from water ingress.After a corrugated steel tape armor isapplied, the cable is completed with aPE outer sheath.
Características Óticas
| G.652 | G.655 | 50/125 μm | 62,5/125 μm | ||
| Atenuação (+20 ℃) | @850 nm | ≤3,0 dB/km | ≤3,0 dB/km | ||
| @1300 nm | ≤1,0 dB/km | ≤1,0 dB/km | |||
| @1310 nm | ≤0,36 dB/km | ≤0,40 dB/km | |||
| @1550 nm | ≤0,22 dB/km | ≤0,23 dB/km | |||
| Largura de banda (Classe A) | @850 | ≥500 MHz·km | ≥200 MHz·km | ||
| @1300 | ≥1000 MHz·km | ≥600 MHz·km | |||
| Abertura numérica | 0,200 ± 0,015 NA | 0,275 ± 0,015 NA | |||
| Comprimento de onda de corte do cabo λcc | ≤1260 nm | ≤1480 nm | |||
