Présentation du produit
The Raman Distributed Fiber Temperature Measurement System (DTS) is a mature distributed fiber temperature measurement technology used both domestically and internationally. It utilizes the spontaneous Raman scattering effect and optical time domain reflection technology to obtain real-time temperature information along the fiber optic distribution. Combined with intelligent fire detection algorithms, it can promptly warn of fire hazards and accurately locate the location of the fire.
This DTS adopts a modular design with high reliability; At the same time, with the advantage of high-speed weak signal processing technology, high spatial resolution can be achieved. We can provide DTS based on multimode fiber and single-mode fiber, especially suitable for online monitoring of high-voltage cables, analysis of power current carrying capacity, monitoring of traffic tunnel fires, monitoring of oil and gas storage tank fires, monitoring of coal conveyor belt fires, and monitoring of dam leaks.
principe de mesure
The temperature measurement of the Raman distributed fiber optic temperature measurement system DTS is based on the spontaneous Raman scattering effect. After high-power narrow pulse width laser pulses are incident on the sensing fiber, the laser interacts with fiber molecules, producing extremely weak backscattered light, including temperature insensitive Stokes light and temperature sensitive anti Stokes light, with different wavelengths. The two are separated by a wavelength division multiplexer WF and detected by a highly sensitive detector APD. The temperature can be calculated based on the ratio of their light intensities. The determination of position is based on optical time domain reflectometry (OTDR) technology, which uses high-speed data acquisition to measure the echo time of scattered signals to determine the corresponding fiber position of the scattered signal.
Technical advantages
- Continuous distributed temperature measurement without measurement blind spots
- 10 kilometers of ultra long measurement distance, rich measurement information
- Fiber is a sensor that combines transmission and sensing
- Can accurately locate the location of the event
- Transmission de signaux optiques, entièrement isolée électriquement, résistante aux interférences électromagnétiques
- Frequency domain absolute encoding, high measurement accuracy, no need for calibration
- Sécurité intrinsèque, adaptée à une utilisation à long terme dans des environnements inflammables et explosifs
- Mesure stable et fiable avec un faible taux de fausses alarmes
Performance characteristics
- Distributed temperature measurement with no measurement blind spots
- Measurement distance: 15km
- Spatial resolution: 0.5-3m
- Measurement time: as low as 5s
- Measurement accuracy: 1 ℃
- Logiciel convivial doté d'une interface visuelle
- Provide multimode/single-mode fiber versions
| Type de fibre | Single Mode or Multi Mode |
| Distance | 2 to 15km |
| Résolution de distance | 0.5m to 3m |
| Sampling | 0.25m/0.5m |
| Temps d'essai | >5s |
| Temperature Detection | -190℃ to 700℃ |
| Temperature Detection Accuracy | 1℃ |
| Temperature Resolution | 0.1℃ |
| Channels | 8 |
| Connecteur à fibre optique | FC/APC |
| power source | 220VAC 50Hz，100W |
| Interface | RJ45, USB, RS232 |
| Taille | 482.6×458.4×90mm（19″rack） |
| Poids | 15kg |
| Température de fonctionnement | -10 °C à 50 °C |
| Température de stockage | -20 °C à 60 °C |
